Tamar Thetford Fridge – Setup & Troubleshooting Guide

Before starting, please check the video tutorial and the PDF guide provided. These contain helpful visuals to guide you through the process.

PDF Version

Power Modes Overview

Your fridge has three main power modes plus an automatic mode that switches between them:

1. Gas

2. 12V Battery (only works while driving)

3. 240V Electrical (mains power at a campsite)

Step 1: Turn on the Control Panel

1. Locate the vehicle’s control panel in the cupboard behind the driver’s seat.

2. Switch on the white master switch and the fridge switch (facing downward).

Step 2: Powering on the Fridge

1. Press and hold the power button until the fridge turns on.

Step 3: Set Automatic Mode

1. Press and hold the grey button until the symbols start flashing.

2. Use the arrows to select the “A” (Automatic) symbol.

3. Press the grey button once to confirm.

4. Set the temperature bars to maximum using the arrows, then press the grey button again to lock it in.

Your fridge is now in automatic mode.

Step 4: Understanding Each Power Mode

240V Power Mode (Campsites)

1. Plug your vehicle into a campsite power source.

2. The power cord symbol will appear, confirming connection.

12V Battery Mode (While Driving)

1. Turn on the vehicle ignition.

2. The fridge will default to 12V mode.

3. A battery symbol will appear when connected.

Gas Mode

1. Open the gas bottle valve fully.

2. The gas symbol will light up once connected.

Important Usage Tips

1. Level Ground: Always park on level ground for optimal cooling performance.

2. Do Not Overfill: Overloading the fridge reduces cooling efficiency.

Still Having Trouble?

If you continue to experience issues, please call us on 1300 016 532 for assistance.