Fiat Battery Disconnect – Step-by-Step Guide

If you need to disconnect the battery on your Fiat-based motorhome, follow the instructions below to safely access and remove the neutral terminal. This guide summarizes the key steps, and you can also view the tutorial video and PDF guide for full visual support.





Fiat Battery Disconnect PDF


For further assistance, please contact our team on 1300 016 532.


1. Accessing the Battery Area


Remove the Front Carpet

Begin by lifting and removing the carpet located at the front of the vehicle. This will expose the plastic access panel covering the battery compartment.


2. Removing the Plastic Panel


Turn the Plastic Screws Using Your Key

Use your vehicle key to turn the plastic screws located on the panel.

These screws secure the panel in place and must be rotated to release it.


Slide Out the Panel

Once the screws are loosened, slide the panel forward.

If it still feels tight, gently wiggle the screws as they may still be partially caught.


Remove the Final Fastener

There is one last fastener that can be turned by hand.

Unscrew this to fully release the panel and expose the battery compartment.


3. Disconnecting the Battery


Remove the Neutral (Negative) Terminal

With the battery now visible:

Press and hold the grey button on the connector attached to the neutral terminal.

While holding the button, pull the connector upward to disconnect it safely.


Need More Help?


For detailed guidance, please:

☎️ Call us on 1300 016 532 if you have any further questions — we're here to help.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article