Toilet Flush Keeps Running – How to Fix It

If your toilet flush keeps running without stopping, it’s likely due to a moisture-related fault with the flush button or control board. This issue can usually be resolved with a quick reset.

Step-by-Step Video Guide

We've created a video to guide you through accessing and cleaning the toilet flush control board:

 Toilet Flush Running Fix – Video

Instructions to Stop the Running Flush

1. Access the Flush Control Board
   • Open the toilet cassette access panel (as shown in the video).
   • Locate the flush button control board underneath the button housing.
2. Disconnect the Board
   • Carefully unplug the board to stop the electrical flow to the flush mechanism.
3. Clean the Board
   • Wipe the board gently using a clean, dry cloth to remove any moisture or condensation.
4. Wait a Few Minutes
   • Allow the board to dry before reconnecting it.
5. Reconnect and Test
   • Plug the board back in.
   • If the flush stops running, the issue has been resolved.

Temporary Workaround (If Issue Persists)

If the flush continues to run after trying the above steps:

• Use the shower hose in the bathroom as a temporary flush solution.
• The onboard water supply will still function, and this workaround is perfectly safe for short-term use.

Need a Replacement During Your Trip?

If you'd prefer the issue to be resolved while you're on hire:

• Call our On-Road Care Team and we’ll check if we can arrange a replacement flush button or board during your journey.

Contact Us

For further assistance or to request a part during your hire:

On-Road Care Team – 1300 016 532